StateLicensed

Electrician License Requirements in Arizona

Verified · November 2026
Training hours
—
Upfront cost
$127
Exam
AZ Statutes and Rules Training Course and Exam (SRE), C-11 / R-11 / CR-11 Electrical Trade Exam
Renewal cycle
Every 2 years
Issuing board
Arizona Registrar of Contractors (ROC)

Sponsored listings

How to get licensed

  1. 1

    Meet the prerequisites

    Be at least 18 years old, pass a criminal background check. All persons named on the license application, 18 or older, must submit a background check through the Registrar's vendor (AccusourceHR); results expire 90 days after completion. The Qualifying Party must be 'regularly employed' by the licensee and hold the necessary experience, knowledge and skill for the classification. There is no separate individual electrician credential or exam route open to someone who isn't attached to a licensed contracting business as its Qualifying Party. [5]

  2. 2

    Complete approved training

    Complete the required training. Arizona does not license individual electricians (no journeyman or master electrician card issued by the state) — only electrical contracting businesses are licensed, via the C-11 (Commercial), R-11 (Residential), or CR-11 (Dual) classifications. The person who actually qualifies the business — the 'Qualifying Party' — generally needs 4 years of practical or managerial experience in the classification, including at least 2 within the last 10 years. The Registrar may reduce the four-year requirement in certain circumstances; the law also permits qualifying technical training to substitute for up to 2 years of experience. Experience can come from an apprenticeship, on-the-job work, or a combination the Registrar accepts; there is no requirement that it come from a Board-approved school. Individual electricians who work as employees of a licensed contractor do not need any state credential of their own. [1]

  3. 3

    AZ Statutes and Rules Training Course and Exam (SRE)

    Pass the AZ Statutes and Rules Training Course and Exam (SRE) (fee: $61). Computer-based, online only Required of the Qualifying Party for every ROC classification, not specific to electrical: 80 questions, 180 minutes, 70% to pass, partly open-book. The Registrar waives it only if the Qualifying Party has been the qualifying party on an Arizona contractor's license within the past five years, because it covers Arizona-specific statutes and rules; the trade exam can be waived on broader grounds. [2]

  4. 4

    C-11 / R-11 / CR-11 Electrical Trade Exam

    Pass the C-11 / R-11 / CR-11 Electrical Trade Exam (fee: $66). 110 questions, 240 minutes, 70% to pass, open-book (NEC and select federal code chapters permitted). Applicants may instead take the NASCLA Accredited Electrical Examination Program ($116, paid to PSI or NASCLA) in place of the AZ ROC trade exam. The Registrar may waive the trade exam entirely if the Qualifying Party was the qualifying party for a license in the same or a comparable classification, in Arizona or another state, within the preceding 5 years — the AZ-specific SRE cannot be waived on the same basis. [3]

  5. 5

    Submit your application

    Submit your application to Arizona Registrar of Contractors (ROC). [2]

  6. 6

    Receive your license

    Once your application is approved, Arizona Registrar of Contractors (ROC) issues your No individual electrician license — Arizona licenses electrical contracting businesses through the Registrar of Contractors: Residential Electrical (R-11), Commercial Electrical (C-11), and Dual Residential/Commercial Electrical (CR-11) for Arizona.

Fees

Fee Amount
Application fee [2] None specified
License fee [2] None specified
Renewal fee [2] None specified
AZ Statutes and Rules Training Course and Exam (SRE) [2] $61
C-11 / R-11 / CR-11 Electrical Trade Exam [3] $66
New application total — R-11 Residential Electrical (Specialty Residential) [2] $720
New application total — C-11 Commercial Electrical (Specialty Commercial) [2] $580
New application total — CR-11 Dual Residential/Commercial Electrical (Specialty Dual) [2] $850
Renewal total — R-11 Residential Electrical [2] $540
Renewal total — C-11 Commercial Electrical [2] $480
Renewal total — CR-11 Dual Electrical [2] $650
Late renewal fee [2] $50

Arizona's ROC fees vary by classification (Residential R-11, Commercial C-11, or Dual CR-11) and combine an application fee, a license fee and, for Residential/Dual, a Residential Recovery Fund assessment, per the ROC's two-year license fee schedule (effective 7/1/2014). Exam fees ($61 SRE + $66 trade, or $116 for the NASCLA electrical option) are paid separately to the testing vendors, not to ROC (see the exam details).

Renewal & continuing education

Renew every 2 years.

Licenses (issued to the contracting business) run on a two-year cycle per the official fee schedule. No continuing-education requirement is listed on the Registrar's Renew a License Checklist or fee pages — renewal instead requires confirming the entity's Arizona Corporation Commission good standing (if an LLC/corp), an active bond covering the licensee's annual volume, and current workers' compensation coverage (or an exemption).

Reciprocity

Endorsement/reciprocity from another state is available.

Arizona has no direct reciprocity with any state and no interstate compact for electrical contractor licensing. Instead, the Registrar offers out-of-state applicants an Out of State Waiver Request: the trade exam and experience requirement may be waived if the Qualifying Party has held a comparable license in another state within the past 5 years and obtained it by a trade examination (A.A.C. R4-9-106(E)). The AZ Statutes and Rules Exam (SRE) is not waived on this basis; it is waived only for a Qualifying Party on an Arizona contractor's license within the past 5 years.

7 state-approved training providers in Arizona — browse programs and compare schools on tradecolleges.org.

Cost calculator

  • $61
  • $66
Total$127

Frequently asked questions

Does Arizona have a state electrician license?

No. Arizona does not license individual electricians (no journeyman or master card). It licenses electrical contracting businesses through the Registrar of Contractors (R-11 Residential, C-11 Commercial, or CR-11 Dual). An employee performing electrical work for a licensed contractor does not need a personal state license.

How much experience do you need to qualify an Arizona electrical contractor license?

The qualifying party generally needs 4 years of practical or managerial experience in the classification, including at least 2 in the last 10 years. The Registrar may reduce the four-year requirement in certain circumstances, and qualifying technical training can substitute for up to 2 years.

What exams does Arizona require for an electrical contractor license?

The AZ Statutes and Rules Exam (SRE, $61, online via Gmetrix) and a trade exam ($66, via PSI Services) — or the NASCLA Accredited Electrical Examination Program ($116) in place of the trade exam.

How much does an Arizona electrical contractor license cost?

New-application totals run $580 (Commercial C-11), $720 (Residential R-11), or $850 (Dual CR-11) for a two-year license, on top of exam fees paid separately to the testing vendors.

Does Arizona require continuing education to renew an electrical contractor license?

No continuing-education requirement is published for renewal; the Registrar instead checks the business's corporate standing, bond, and workers' compensation coverage.

Sources

  1. [1] azleg.gov/ars/32/01122.htm — accessed 2026-11-08
  2. [2] roc.az.gov/licensing-fees — accessed 2026-11-04
  3. [3] roc.az.gov/licensing-fees — accessed 2026-07-11
  4. [4] roc.az.gov/renew-license-checklist — accessed 2026-07-11
  5. [5] roc.az.gov/applying-for-a-license — accessed 2026-07-11
  6. [6] roc.az.gov/applying-for-a-license — accessed 2026-11-04