StateLicensed

HVAC Technician License Requirements in Utah

Verified · July 2026
Training hours
25 hrs
Upfront cost
$175
Exam
Utah HVAC (H100) Written Trade Exam, Utah Contractor Business and Law Exam
Renewal cycle
Every 2 years
Issuing board
Utah Division of Professional Licensing (DOPL), Department of Commerce

How to get licensed

  1. 1

    Meet the prerequisites

    Pass a criminal background check. DOPL's own contractor-licensing pages do not state a minimum age. A fingerprint-based criminal background check requirement for contractor applicants takes effect January 1, 2027 (announced as part of the S350-to-H100 transition); prior to that date DOPL relies on a criminal-history disclosure/review rather than mandatory fingerprinting. H100 applicants must also hold RMGA (Rocky Mountain Gas Association) certification or equivalent and document 2 years / 4,000 hours of HVAC-specific paid experience verified by W-2 forms. [5]

  2. 2

    Complete approved training

    Complete 25 hours of training at a state-approved program. Utah has no separate individual HVAC technician/journeyman license; HVAC/R work is licensed at the contractor level (H100 classification) through DOPL. The 25 hours is a mandatory pre-licensure course (approved providers: Associated Builders and Contractors Inc, Utah Home Builders Association, or Associated General Contractors of Utah), not a technician training-hour requirement. Effective April 20, 2026, DOPL replaced the legacy S350 HVAC specialty classification with H100; new H100 applicants must also hold Rocky Mountain Gas Association (RMGA) certification or equivalent, and document 2 years (4,000 hours) of HVAC-specific experience verified by W-2 forms (or an alternate pathway such as a construction management degree). [1]

  3. 3

    Utah HVAC (H100) Written Trade Exam

    Pass the Utah HVAC (H100) Written Trade Exam. In-person at one of 21 ProV testing centers, or online via Examroom AI; 3 total attempts allowed (30-day minimum wait before first retake, 180-day minimum before subsequent retakes) Exam fee is paid directly to ProV and is not published on DOPL's own pages; DOPL's exam-information page does not list a dollar amount, so it is recorded as null rather than estimated. [2]

  4. 4

    Utah Contractor Business and Law Exam

    Pass the Utah Contractor Business and Law Exam. In-person at one of 21 ProV testing centers, or online via Examroom AI; required in addition to the HVAC trade exam for all H100 applicants Same fee-disclosure caveat as the trade exam: DOPL does not publish a dollar figure on its own pages. [2]

  5. 5

    Submit your application

    Submit your application to Utah Division of Professional Licensing (DOPL), Department of Commerce with the $175 application fee. Typical processing time: Approximately 6-7 weeks for H100 applications under the current (post-April 2026) requirements. [5]

  6. 6

    Receive your license

    Once your application is approved, Utah Division of Professional Licensing (DOPL), Department of Commerce issues your HVAC Contractor License (H100) for Utah.

Fees

Fee Amount
Application fee [3] $175
License fee [3] None specified
Renewal fee [3] $128
Utah HVAC (H100) Written Trade Exam [2] None specified
Utah Contractor Business and Law Exam [2] None specified
Contractor e-library surcharge [3] $1
Replace/change qualifier [3] $50

Figures are from DOPL's official FY2025-26 fee schedule, 'HVAC Contractor' line: $175 application fee, $128 renewal fee, plus a $1 e-library surcharge applied per transaction. DOPL does not publish a separate one-time 'license issuance' fee distinct from the application fee, so license is recorded as null.

Renewal & continuing education

Renew every 2 years. 6 continuing education hours required per cycle.

Contractor licenses (including HVAC/H100) renew on a two-year cycle expiring November 30 of odd-numbered years. 6 hours of continuing education are required per cycle: 3 core hours plus 3 hours that may be core or professional, with a maximum of 3 hours completable online. Secondary (non-.gov) sources indicate 3 of the 6 hours must be HVAC-system-specific for HVAC contractors, but this specialty breakdown was not independently confirmed on a DOPL .gov page, so it is noted here rather than asserted as the primary ceHours figure.

Reciprocity

Endorsement/reciprocity from another state is available.

Utah does not participate in an interstate compact for contractor licensing but offers licensure by endorsement for applicants already licensed as HVAC/mechanical contractors in another state; DOPL publishes a comparison of Utah's classifications against equivalent out-of-state licenses. Contact DOPL directly for endorsement eligibility, since a dedicated endorsement page for contracting could not be located at a stable URL.

6 state-approved training providers in Utah — browse programs and compare schools on tradecolleges.org.

Cost calculator

  • $175
Total$175

Frequently asked questions

Does Utah license individual HVAC technicians or journeymen?

No. Utah has no separate apprentice or journeyman HVAC license. HVAC/R work is licensed only at the contractor level (classification H100) through the Division of Professional Licensing (DOPL). Technicians who are not the licensed contractor/qualifier typically work under a licensed HVAC contracting business.

What replaced Utah's old S350 HVAC license?

Effective April 20, 2026, DOPL replaced the legacy S350 HVAC specialty classification with a new H100 HVAC Contractor classification. Applications submitted (online or postmarked) on or after that date must meet the updated H100 requirements, including RMGA gas-technician certification and W-2-verified experience.

What exams are required for the H100 HVAC contractor license?

Applicants must pass two exams through ProV Exams: the Utah HVAC (H100) written trade exam and the Utah Contractor Business and Law exam. Both can be taken in person at a ProV testing center or online via Examroom AI, with up to 3 total attempts.

How much does an HVAC contractor license cost in Utah?

Per DOPL's official fee schedule, the HVAC Contractor application fee is $175 and the renewal fee is $128, plus a $1 e-library surcharge. A 25-hour pre-licensure course from an approved provider is also required before applying.

How often does a Utah HVAC contractor license need to be renewed?

HVAC contractor licenses renew every two years, expiring November 30 of odd-numbered years, and require 6 hours of continuing education per renewal cycle.

Sources

  1. [1] commerce.utah.gov/dopl/contracting/apply-for-a-license/specialty-contractor-license/ — accessed 2026-07-12
  2. [2] commerce.utah.gov/dopl/contracting/exam-information/ — accessed 2026-07-12
  3. [3] commerce.utah.gov/dopl/wp-content/uploads/2022/11/fee-schedule.pdf — accessed 2026-07-12
  4. [4] commerce.utah.gov/dopl/contracting/continuing-education/ — accessed 2026-07-12
  5. [5] commerce.utah.gov/dopl/contracting/ — accessed 2026-07-12
  6. [6] commerce.utah.gov/dopl/contracting/frequently-asked-questions/ — accessed 2026-07-12