If you’re preparing for Washington’s 01 general journey level electrician exam, the code book you use on the job may not be the one the exam is based on. As of November 4, 2026, the Washington State Department of Labor & Industries (L&I) and its exam bulletin still name the 2020 National Electrical Code (NEC), while Washington’s field rules are on a newer edition and about to change again.
The short answer: bring the edition your exam names
Today, that’s the 2020 NEC. Check the current PSI exam bulletin again before you buy books or test, because L&I plans to update the exams.
Three code editions, three different jobs
| What it’s for | Edition | Status we found |
|---|---|---|
| The 01 exam | 2020 NEC | Named by the bulletin and L&I’s exam page |
| Field work now | 2023 NEC | Current edition per L&I until the change below |
| Field work from December 31, 2026 | 2026 NEC | Adopted by L&I in November 2025 with a delayed effective date. Related Washington rule changes were still described as proposed |
The exam isn’t scheduled to catch up right away. L&I’s August 2026 Electrical Currents newsletter says state electrical exams will move to the 2026 NEC in July 2027.
Two cautions:
- Older notices are out of date. L&I’s rules page still has a note about moving exams to the 2023 NEC in 2025. L&I’s exam page and the bulletin both still say 2020, so we’d follow those and the newer newsletter.
- The date could affect you. A December 2024 L&I newsletter said candidates get the latest exam version even if they started on an earlier one. If your testing could run into mid-2027, check which version you’ll get. The same newsletter says exams focus on foundations, and that little changes between cycles, so this is worth checking rather than worrying about.
What you can bring
All Washington electrical exams are open-book. L&I allows:
- The NEC. L&I lists the 2020 edition.
- Washington’s electrical law and rules. Bring printed copies of Chapter 19.28 RCW and Chapter 296-46B WAC, hole-punched in a three-ring binder. The bulletin bases questions on the current versions, so print them from L&I’s laws and rules page close to your exam date.
- Other original copyrighted references. L&I gives Ugly’s, Ferm’s Fast Finder and Soares Grounding as examples.
- A basic calculator. The bulletin requires it to be silent, battery-operated and non-programmable, with no paper tape or alphabet keyboard.
Your books can have highlighting, underlining and permanent index tabs. Handwritten notes, sticky notes and removable tabs aren’t allowed. Proctors check your materials, and L&I treats handwritten notes and markings as an attempt to cheat.
Check the edition before buying a study guide
Prep sellers offer more than one edition at the same time. For example, 1 Exam Prep lists both a 2020-based Washington package and a 2026-based study guide.
Our view is that for an exam before July 2027, the 2020 edition is the safer match, though a newer book can still be useful for your day-to-day work. We have no relationship with this seller and haven’t tested its materials.
What’s on the 01 exam
The bulletin lists two sections, and you must score at least 70% on each:
- NEC & Theory: 60 questions in 3 hours. On a straight percentage, you’d need 42 correct.
- Washington Codes: 17 questions in 1 hour. On a straight percentage, you’d need 12 correct.
PSI bills electrician exams by the hour. The bulletin’s fee table shows $75 for 4 hours, and retest sections cost $45 for 1 hour or $65 for 3 hours. That’s on top of L&I’s $114.60 application fee, of which $44.20 is nonrefundable once you apply.
| NEC & Theory topic | Questions |
|---|---|
| Wiring methods (NEC 300–398) | 10 |
| General trade knowledge and theory | 7 |
| Overcurrent protection (NEC 240) | 6 |
| Grounding and bonding (NEC 250) | 6 |
| Services (NEC 230) | 4 |
| Special occupancies (NEC 517–590) | 4 |
| General requirements (NEC 100–110) | 3 |
| Wiring and protection (NEC 200–225, 280–285) | 3 |
| Electrical equipment (NEC 400–427, 455–480) | 3 |
| Motors, HVAC, generators and transformers (NEC 430–450) | 3 |
| Special equipment (NEC 600–695) | 3 |
| Hazardous locations (NEC 500–516) | 2 |
| Emergency and standby systems (NEC 700–702) | 2 |
| Introduction (NEC 90) | 1 |
| Equipment over 600 volts (NEC 490) | 1 |
| Special conditions (NEC 705–780) | 1 |
| Communication systems (NEC 800–830) | 1 |
| Total | 60 |
The separate Washington section covers the state’s electrical laws and rules. The bulletin lists major load calculations for some other exams, but none for the 01.
Who can take the exam now
The route changed this year. Washington’s statute requires a registered apprenticeship or another listed route for the 01 exam. An exception that let some experienced trainees qualify without an apprenticeship, RCW 19.28.195, was written to expire July 1, 2026. An L&I newsletter said those applications had to arrive before that date.
L&I’s main electrician page, last updated in February 2026, still lists the 8,000 work hours and 96 classroom hours without explaining the change. If you’re a Washington trainee who didn’t apply in time, confirm your route with L&I at 360-902-5269.
L&I’s September 2026 out-of-state application lists these routes:
- Licensed in another state: documentation from that state of 8,000 supervised hours worked there, at least 4,000 of them industrial or commercial, plus 96 classroom hours.
- Registered apprenticeship: a completed 8,000-hour US journey level electrician program, with at least 4,000 hours of new industrial or commercial installations.
- Work experience: 16,000 hours, at least 4,000 of them new industrial or commercial, plus 96 classroom hours.
- Military: 8,000 hours of electrical construction experience in a construction battalion.
- Canadian Red Seal: a journeyperson construction electrician endorsement, with a US Social Security or tax ID number.
If you’re licensed in Oregon, you may be able to skip the exam. L&I’s reciprocal certificate is generally for Oregon general journeyman licenses earned through an 8,000-hour apprenticeship with at least 576 classroom hours and Oregon exams, or Oregon general supervising licenses earned by exam. It’s Washington’s only reciprocity agreement we found. See our electrician reciprocity table for other states.
For the full requirements, see our Washington electrician page and electrician license hub.
Retake rules and your one-year window
L&I’s rules put a clock on your approval:
- You can’t schedule until you have an L&I approval letter, and you have one year from the letter’s date to pass.
- Your first attempt in that period must include every section. After that, you only retake the sections you failed.
- You must wait at least 14 days between attempts.
- If you fail the exam or any section three times in a one-year period, you must wait 90 days between all future attempts until you pass.
- If the year ends before you’ve passed, you reapply for approval, and sections you already passed don’t carry over.
That window is one more reason to have the right book before your approval letter arrives.
Sources
- PSI Services — Washington State Department of Labor & Industries — “Electrical Exam Bulletin” — undated, accessed November 4, 2026 — https://www.lni.wa.gov/licensing-permits/_docs/display_bulletin.pdf
- Washington State Department of Labor & Industries — “Electrical Examination” — updated June 1, 2026 — https://www.lni.wa.gov/licensing-permits/electrical/electrical-licensing-exams-education/electrical-examination
- Washington State Department of Labor & Industries — “Electrical Laws, Rules & Policies” — accessed November 4, 2026 — https://www.lni.wa.gov/licensing-permits/electrical/laws-rules-policies
- Washington State Department of Labor & Industries — “Rule-Making Order CR-103P” (2026 NEC adoption) — adopted November 18, 2025 — https://www.lni.wa.gov/rulemaking-activity/AO25-08/2508CR103.pdf
- Washington State Department of Labor & Industries — “Electrical Currents Newsletter Archive” — includes the September 2024, December 2024 and August 2026 issues — https://lni.wa.gov/licensing-permits/_docs/Archival.pdf
- Washington State Department of Labor & Industries — “RCW 19.28 Electricians and Electrical Installations” — September 2025 — https://lni.wa.gov/forms-publications/F500-143-000.pdf
- Washington State Department of Labor & Industries — “Out-of-State Application for Electrical Examination” (F626-009-000) — September 2026 — https://lni.wa.gov/forms-publications/F626-009-000.pdf
- Washington State Department of Labor & Industries — “Electrician” — updated February 4, 2026 — https://www.lni.wa.gov/licensing-permits/electrical/electrical-licensing-exams-education/electrician